How it works
Estimate whole tiles using nominal face dimensions. Grout spacing and cuts are not modelled individually.
Inputs and units
| Input | Example value | What to enter |
|---|---|---|
| Surface area | 20 m² | Required unit: m². Use a non-negative value. |
| Tile length | 30 cm | Required unit: cm. Must be greater than zero. |
| Tile width | 30 cm | Required unit: cm. Must be greater than zero. |
| Waste allowance | 10 % | Enter the percentage as a number: for 15%, enter 15. Use a non-negative value. Allowed range: 0–100. |
Worked example
Show example inputs and results
This example is generated by the same calculation engine using the starting values in the form. Your own inputs produce your own result.
- Surface area
- 20 m²
- Tile length
- 30 cm
- Tile width
- 30 cm
- Waste allowance
- 10 %
Complete example results
- Tiles
- 245
Reading the result
Convert measurements to the same unit and use the net area to cover. Replace any package, waste or efficiency input with your product information. A quantity estimate alone does not determine installation conditions.
Questions and answers
Can I use the example values for my own calculation?
The example values illustrate the calculation. Replace every input with your own information, especially dates, rates and the selected operation.
Why are some results rounded?
Results display up to 8 decimal places. Calculations use the unrounded values; very small values use scientific notation. JavaScript floating-point arithmetic can introduce tiny rounding differences.
Are my inputs sent to a server?
The calculator processes inputs in your browser. Its code does not send your values to a server.